Vision Measure
Measure real dimensions in mm with a one-point calibration.
Ba bước để chạy được
- 1. Tải gói .orx — tải tự do, không cần mua trước. Giải nén rồi chạy
./runGui.sh: gói tự kiểm chữ ký, đọc mã thiết bị của bạn và ghi raactivation-request.json. - 2. Mua giấy phép — giấy phép gắn với đúng thiết bị trong file yêu cầu ở bước 1.
- 3. Kích hoạt — tải
activation.jsonvề, đặt cạnh gói, chạy lại là xong. Sau đó chạy offline vĩnh viễn, không cần mạng.
Tải gói mà chưa mua thì chạy được đến bước xin kích hoạt rồi dừng — dùng để xem trước gói thật và kiểm tra máy có đọc được thiết bị không, trước khi trả tiền.
Measures a part's real size in millimetres. Calibrated with a single reference object of known size - the app works out the mm/pixel ratio itself, no lens-calibration knowledge required. Best for a fixed fixture where the part always sits at the same height as the calibration sample; for parts off-centre or at varying height, see Vision Measure Pro.
Requires
· GigE Vision camera
· Gigabit network port
Features
· Single-reference calibration - show one known-size sample, done
· Reports real width/height in mm, with a pass/fail band per dimension
· Rectangle, circle, or free-contour fit for the measured region
· Shares its camera/UI base with Vision Align